ASUS P4P800S – X AUDIO DRIVER

The minimum recommended wattage is W for a fully configured system. To change the user password, follow the same steps as in setting a user password. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. For system failure due to overclocking, use the C. Bios Setup Program The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen.

Uploader: Shakasida
Date Added: 28 August 2004
File Size: 5.92 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 77780
Price: Free* [*Free Regsitration Required]

This 9-pin COM1 port is for serial devices. Visit the ASUS website for updates. Under Linux, use the Hyper-Threading compiler to compile the code.

DO NOT place jumper caps on the fan connectors! Hardware Monitor If any of the monitored items is out of range, the following error message appears: Copy the original or the latest motherboard BIOS to the bootable floppy disk. The number of device items that appear on the screen depends on the the number of devices installed in the system. If any of the monitored items is out of range, the following error message appears: Shut down and reboot the system so BIOS can automatically reset parameter settings to default values.

Select an item then press Enter to display the configuration options. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC.

  INTEL 845GL GV VGA DRIVER

When lit, the green LED indicates that the system is ON, in sleep mode, or in soft-off mode, a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.

Asus P4P800S-X SoundMAX Audio Driver

Use the navigation keys to select items in the menu and change the settings. After selecting this option, a confirmation appears. The default BIOS settings for this motherboard apply for most conditions to ensure auduo performance. The functions of the Line Out, Line In, and Microphone jacks change when you select the 6-channel audio configuration as shown in the following table.

The bus frequency external frequency multiplied by the bus multiple equals the CPU speed. Do either one of the following to create a bootable floppy disk. Confirm the password when prompted. Reboot the system from the hard disk. A – supports one module inserted into either aueio, in a Single-channel memory configuration.

The system may become unstable and may experience difficulty powering up if the power supply is inadequate. Discard Changes Allows you to discard the selections you made and restore the previously saved values. If all the necessary files are found in the floppy disk, the BIOS update process continues.

  GERALD LONGO HARNESS DRIVER DOWNLOAD

Insert the floppy disk that contains the BIOS file. O4p800s to Table 2 for configurations. Doing so may damage the motherboard.

P4PX | ASUS Global

Removing the cap will cause system boot failure! When a corrupted BIOS is detected, the following screen message appears. The edge with external ports goes to the rear part audoi the chassis as indicated in the image below. Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

ASUS P4P800S-X – motherboard – ATX – Socket 478 – i848P Series

Installing A Dimm 1. Select [Ok] to discard any changes and load the previously saved values.

Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your adio. Bios Setup Program The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

Detailed descriptions of the BIOS parameters are also provided.